R RF VISUALIZERField visualiser

Support

Usually within 1–2 business days · kpenlab@163.com

RF VISUALIZER is a close-up magic prop for iPhone. The routine works with the phone alone; a Bluetooth button mic and a Wi-Fi prediction prop are optional.

I can't open the backstage

  1. Tap empty space 5 times within 2 seconds. There is no button or menu — this is deliberate, so nothing on screen gives it away.
  2. Tap on the picture itself, not on a HUD button at the edge of the screen; taps on buttons don't count.
  3. If you are too slow the counter resets. On first launch a guided overlay shows 1/5 … 5/5 so you can see the count.
  4. Once inside, the top-left "←" returns to the stage.

There are no light columns on screen

  1. The stage opens in CAM — plain camera with decorative readouts only. Tap SCN to switch the beams on.
  2. If the picture is black, the camera permission is missing: Settings → RF VISUALIZER → Camera.
  3. CODE freezes the beams into machine code. Tap it again to get the columns back.
  4. If the beams turned into words and then faded out, that is the end of the effect — it replays on the next long press.

I speak, but no words appear

  1. Speech input lives backstage, not on the stage screen: open the backstage with five taps, then use the voice remote.
  2. Hold to talk and release to stop — releasing is what ends the transcription.
  3. On a Bluetooth button mic, presses shorter than 0.4 s are ignored on purpose.
  4. Speech recognition needs the system offline model for your language; iOS downloads it the first time dictation is used.
  5. Check Settings → RF VISUALIZER → Microphone and Speech Recognition.

Nothing happens when I hold the screen

  1. The line must be set first. Backstage → type it, tap a card, or speak it.
  2. Then hold for one full second, or double-tap the paired remote's button.
  3. If the beams are frozen with CODE on, the app exits CODE by itself and plays normally.
  4. Hold the picture, not a HUD button.

The Wi-Fi prop's network names don't show up

  1. The prop broadcasts the line you played for about 3 minutes — it is not always on.
  2. The phone must be joined to the prop's own hotspot first (backstage → Devices → Join Wi-Fi).
  3. Do not join that hotspot with the phone you ask the audience to check — use a second device, otherwise the audience device can't see the networks.
  4. Band and country must match the prop's region; change them on the Devices card if the names never appear.
  5. While broadcasting, the Devices card shows a countdown and STOP — tap STOP to end it early.

The Bluetooth microphone won't pair

  1. Power the mic on and open backstage → Devices → pick the microphone, then scan. Status reads "Scanning…" then "Connecting…".
  2. If it stays on Connecting for more than 20 seconds, close and reopen the switch.
  3. Make sure it is not still connected to a phone or another app.
  4. Last resort: turn the phone's Bluetooth off and on, then rescan.

Recording, Photos and supported devices

REC starts and stops a screen recording; when you stop, it is saved to Photos automatically, so the app needs "add to Photos" permission. Recordings stay on the phone — nothing is uploaded.

Requirements: iPhone with iOS 18 or later. iPad is not supported. The camera view and the light columns need a device with ARKit support.

Still stuck?

Email kpenlab@163.com and tell us the iPhone model, the iOS version, and what the status line says on the Devices card. A photo of the screen helps.

使用支持

通常 1~2 个工作日内回复 · kpenlab@163.com

RF VISUALIZER 是一款 iPhone 近景魔术道具。只用手机就能走完流程;蓝牙按键麦克风与 Wi-Fi 预言道具是可选配件。

进不去后台

  1. 在空白处 2 秒内连点 5 下。屏幕上没有按钮也没有菜单,这是故意的,免得被观众看出入口。
  2. 点在画面上,不要点在边缘的 HUD 按钮上 —— 点按钮不计入 5 下。
  3. 太慢的话计数会重置。首次启动会有 1/5 … 5/5 的引导提示,能看到自己点了几下。
  4. 进去之后左上角「←」回表演页。

画面上没有光柱

  1. 进入时是 CAM:只有相机和装饰性读数。点 SCN 才会出现光柱。
  2. 画面全黑说明相机权限没给:设置 → RF VISUALIZER → 相机。
  3. CODE 会把光柱冻结成机器码,再点一次恢复。
  4. 如果光柱已经变成文字又淡出了,那是效果演完了,再长按一次就会重来。

我说话了,但没有出现文字

  1. 语音输入在后台里,不在表演页:先连点 5 下进后台,再用语音遥控。
  2. 按住说话、松手结束 —— 松手才代表这一句说完了。
  3. 用蓝牙按键麦克风时,短于 0.4 秒的按键是故意忽略的。
  4. 语音识别依赖系统的离线模型,第一次使用时 iOS 会自行下载。
  5. 检查 设置 → RF VISUALIZER → 麦克风 / 语音识别。

长按屏幕没反应

  1. 得先设好台词:后台里打字、点一张牌、或者说出来。
  2. 然后长按满 1 秒,或双击已连接的遥控按键。
  3. 如果 CODE 开着,长按时 App 会自动退出 CODE 并正常播放。
  4. 长按画面,不要按在 HUD 按钮上。

Wi-Fi 道具的网络名不出现

  1. 道具只在播放后的约 3 分钟内广播,平时不发。
  2. 手机要先连上道具自己的热点(后台 → 设备 → 连接 Wi-Fi)。
  3. 别用「拿给观众检查」的那台手机去连道具热点,否则那台设备就看不到这些网络名了 —— 用第二台设备看。
  4. 频段与国家要和道具所在地一致;一直不出现就去设备卡里改一下。
  5. 广播期间设备卡上有倒计时和「停止」,点停止可提前结束。

蓝牙麦克风连不上

  1. 麦克风开机,后台 → 设备 → 选择麦克风 → 扫描。状态会显示「正在扫描…」「正在连接…」。
  2. 停在「正在连接…」超过 20 秒,关掉再打开一次。
  3. 确认它没有还连着别的手机或别的 App。
  4. 最后手段:手机关蓝牙再打开,重新扫描。

录像、相册与支持的设备

REC 开始 / 停止录屏,停止后自动存进相册,所以需要「添加到相册」权限。录像只留在手机上,不会上传。

要求:iPhone,iOS 18 及以上。不支持 iPad。相机取景与光柱需要支持 ARKit 的机型。

还是不行?

发邮件到 kpenlab@163.com,写明 iPhone 型号、iOS 版本,以及设备卡上状态栏显示什么。附一张屏幕照片最好。